Comments

• 

  Jayraj Ghatge February 21, 2020 at 6:55am

  Greetings Chris.

  How can I apply PV panels on the surface of a building in ladybug/ honeybee? I want to simulate the difference in the solar heat gain inside the building in case of Glass vs PV panel.
• 

  artemátyika February 2, 2019 at 3:34pm

  Dear Chris,

  While using Honeybee, I am confused about 0 and 1 values as input for 'stepOfSimulation' from my 11 hours-analysis period and the correspondence to 'visualize microclimate maps' and 'color surfaces by EP results' components.

  Having set a period from 9:00 to 19:00 for a single day (10th december), and using a slider from 0 to 10 (11 values, 0 is 9:00), the following mismatch occurs:

  • setting value 0 works for surface temperature but not for mean radiant temperature (warning says "stepofSimulation is outside the bounds of the comfResultMTX", but I do have 11 values from radiant temp matrix).

  • setting value 1 is rendered as "hour 2 of simulation" for surface temperature (FIG 1) and as "9:00" of radiant temperature (FIG 2).

  It seems there is a slide of 1 hour. How should I interpret this?

  Kind regards,

  artemátyika
• 

  zhaochuan November 23, 2018 at 11:32pm

  Hi Chirs，

      I am sorry to disturb you . When I use the honeybee to do the dynamic daylight simulation . I meet a problem . When I set the blind's angle to 90° and the quality to 2 , the DA is not 0 .I think it is wrong .Could you tell me how to solve it .

  Thank for you in advance.

  zhaochuan

  Blind_illumiance.gh

  Office.3dm

  
• 

  Shahrokh Kamyab November 18, 2018 at 3:54am

  Hello Chris!

  On the subject of epw files I have a question , I received a weather file from  Meteonorm (attached) which gives errors when I use EP analysis in GH.

  I test the same fime with other epw file from ladybugtools and it works. 

  Have you encountered such problem before? are epw friles from meteonorm not compatible with ladybug? 

  Error message is also attached.Image%201.jpg

  Best regards

  Shahrokh

   Kasgar_Mahalleh-hour.epw
• 

  fatima belok July 30, 2018 at 5:06am

  Hello chris,

  how are you

  I am facing an error in honey bee could you help me plzz

  the error is :

  1. Failed to download the files needed to run EnergyPlus with OpenStudio 2.x.
  SystemError('The request was aborted: Could not create SSL/TLS secure channel.',)

  2. Failed to download the files needed to PostProcess EnergyPlus results with OpenStudio 2.x.
  SystemError('The request was aborted: Could not create SSL/TLS secure channel.',)

  

  Glare_Analysis.gh

   hope to reply as soon as possible

  THANK YOU

  FATIMA
• 

  Elham Soltani July 28, 2018 at 10:21am

  Hi Dear Chris,

  I hope all is well. I have encountered with this error in Grasshoper while previously I did not have that and the script worked. I appreciate if could help me to solve this problem. I have a deadline and I really need that.

  Thanks in advance for your consideration.

  
• 

  JS Lee November 29, 2017 at 9:16pm

  Dear Chris

  I'm Studying Therm. & simulating with Honeybee Therm components.

  My question is 

  There are three methods to calculate boundary conditions in therm. (simplified, comprehensive, radiation enclosure surface) Among them, the "simplified" method is known to be usedwhen the film coefficient considers radiation.

  However, the "simplified" method could not be used in the honeybee therm component. Is there a way to use the simplified method?
• 

  杨宇辉 November 18, 2017 at 8:53pm

  Hi Chris,

  i'm  running contour mesh in ladybug,but  a little problem occur .

  look the pic , I believe it's easy to fix , i want to know how to fix the code.

  
• 

  fateme November 6, 2017 at 12:25am

  Hi chris,

  I want to run the energy simulation in honeybee,and i took all the necessary inputs, but when i set to true "run energy plus" nothing was happened! even no error was occurred!

  what should i do?

  thanks in advance,

  fateme
• 

  Angelo Figliola October 3, 2017 at 2:29pm

  Hi Chris,

  I'm running a daylight's simulation of an office and i would like to try the performance of light diffusing materials. I know that honeybee can import the .xml files and if i remember well Okalux has shared this files. Where can i find the files?

  Thanks in advance,

  Angelo